Print page
Digital current and voltage meters
Digital meter replace traditional gauge used in switching stations and power and control boxes.
Meters measure current and voltage in True RMS values. They are resistant to interferences due to higher harmonics.
TWNP type three-phase voltage and current
meters
- range of measured voltages 50 ÷ 265V AC in phase
- range of measured currents 0,1 .. 5 .. 6A from current tranformers 5A/5A .. 800A/5A (ammeter version), 1kA/5A .. 5kA/5A (kiloammeter version)
- current indication on the primary side of current measuring transformer
- selection of transformer is effected by 16-position switch
- available version with current transducers with range of measured currents of up to 200A, manufactured by our company
- pannel type, dimensions 96 x 96 x 75 mm.
TWMP type three-phase voltage and power meters
- range of measured power: 3x(0,01...240)kW
- range of measured currents 0,1 .. 5 .. 6A from current tranformers 5A/5A .. 800A/5A
- current indication on the primary side of current measuring transformer
- selection of transformer is effected by 16-position switch
- available version with current transducers with range of measured currents of up to 200A, manufactured by our company
- pannel type, dimensions 96 x 96 x 75 mm.
CWN type three-phase voltage meter
Srange of measured voltage 50...500V
- CWN/T - panel mounting
- CWN/S - rail mounting
- type: 1-phase
CWP type current meters
Built-in switch for setting up ratio of current measuring transformer. Meter shows the value of current on the primary side of measuring transformer within the range of 0...800A.
- CWP/T - pannel mounted
- CWP/S - 35mm rail mounted
- type: 1-phase
CWU type universal meters
- voltage measurement
- current measurement
- cos fi and tg fi measuring
- type: 1-phase, pannel mounted
TWN type three phase voltage meter
- three-phase voltage measurement
- range of measured voltages: 3x(50...230)V (40...50...60)Hz
- does not require voltmeter switch
- 35mm rail mounted
